Home > ALCOA > Marson®

Marson®

Attention: open in a new window. PDFPrintE-mail

Klik-Fast® Standard Blind Rivets

All Aluminum

alt

Alcoa and marson offer you the highest of quality in their aluminum blind rivets for a range of applications. Click here for more details..

All Steel

Click here for more details..

All Stainless

Click here for more details..

Aluminum Body / Steel Mandrel

Click here for more details..

Klik Fast® Specialty Rivets

Closed End: All Materials

alt

The Klik-Fast® Closed End Rivet is moisture-resistant due to tight seal. It has a greater shear and tensile strength. Mandrel is retained 100% of time

  • Aluminum Rivet/Steel Mandrel
  • All Aluminum
  • All Stainless

Click here for more details..

Klik-Lock™

alt

Equivalent to: Monobolt®, Magna-Lok®, Tigerbolt®, Inter-Lock®, Ultra-Grip® and Mega-Grip® specialty rivets

  • NO Special Nosepiece Required
  • Increase Shear & Tensile
  • Vibration Proof
  • 360° Internal Locking Feature
  • Watertight Seal
  • Comform To IFI-134

Click here for more details..

Multi-Grip™

alt

Klik-Fast® Multi-Grip Rivet has an extended grip range capacity that reduces inventory (fewer sizes required. Use Klik-Fast® Multi-Grip Rivet as a standard open-end rivet. No special tools are required.

  • Aluminum Rivet /Steel Mandrel
  • Large Flange Aluminum Rivet/Steel Mandrel

Click here for more details..

Plastic Rivets

alt

The Klik-Fast® Plastic Rivets is precision-molded with all nylon materials. The secure lock prevents pull-out. It will fasten plastic to plastic, plastic to metal or plastic to fiberglass
 
Marson Klik-Lok Plastic Rivets are the same precision-molded all nylon rivets used in domestic auto manufacturers, both original equipment and replacement parts. In addition, Klik-Lok Plastic Rivets are ideal for non-conductive and non-corrosive environments. Klik-Lok Plastic Rivets fasten plastic to plastic, plastic to metal and plastic to fiberglass. As they set, three "legs" form to securely lock the components in place and prevent pullout.

Click here for more details..

Q-Lok™

alt

The retained mandrel increases shear and tensile strength. The mandrel breaks flush when used in mid-grip range. Klik-Fast® Q-Lok Rivet is moisture-resistant due to tight seal. Available diameter up to 3/16". It can be used in place of other structural rivets in many applications.

Click here for more details..

Tri-Bulb™

alt

  • Large Footprint on blind side
  • Multi-Grip Capability
  • Oversized hole tolerant
  • Aluminum body and mandrel
  • Great for soft or brittle materials.

Click here for more details..

Klik-Split® T-Rivet

alt

  • High Clamp Up
  • High shear strength
  • Creates a wide bearing surface

Click here for more details..

Marson® Manual Rivet Tools

Big Daddy Hand Tool / 39035

alt

Same tool as 39010, but comes with 39009 attached, extending the tool's reach by an additional 2 1/2". Weight 4 lbs. Click here for more details..

Big Daddy Hand Tool / 39010

alt

This is the same tool as 39031, but comes with 3/16", 1/4" and special 1/4" Klik-Split rivet nosepieces. Weight 3 1/4 lbs. Click here for more details..

Big Daddy® Hand Tool / 39031

alt

The Big Daddy is our most versatile and powerful hand riveter, taking the hard work out of setting large diameter blind rivets. Its extra-long handles provide excellent leverage and permits working a foot beyond natural reach. Other features include a patented bearing design, self adjusting two-piece jaws and single-unit body construction with a steel insert to provide stronger threads for the nosepieces included. In addition the Big Daddy features a double gear reduction system which easily sets from 1/8" to 1/4" diameter Klik-Fast rivets in all alloys including 1/4" Klik-Split® rivets. And a one-piece collet case eliminates the need to adjust the tool when changing rivet diameters. The Big Daddy comes with  5/32", 3/16", and 1/4" nosepieces which are stored in the body. Weight: 3 3/4 lbs. Click here for more details..

HP-2® Hand Tool / 39000

alt

The HP-2 is the largest selling hand rivet tool in the industry. Known and trusted for durability, quality and performance, the HP-2 is often copied but never equaled. It's square shoulder fulcrum pin of cold-formed heat treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools. Other quality features include: precision die cast, high strength aluminum alloy body; drop forged carbon steel upper handle; and thick cushion-molded vinyl grips for comfort. The HP-2 sets up to 3/16" steel rivets and comes with four mounted nosepieces (3/32", 1/8", 5/32", and 3/16") and a service wrench. Weight 1 lb. 3 oz. Click here for more details..

Marson KL-2 Plastic Rivet Setter / 48005

alt

This long-reach tool is just what today's professional needs for hard-to-reach spots, especially in automotive applications such as flexible bumpers, wheel wells, license plate brackets and bumper reinforcements. In addition to the tool's long reach, it offers one-stroke setting and a universal nosepieces that sets all plastic rivets. The tools is packaged in a reusable, heavy-duty vinyl pouch. Weight: .75 lbs. Click here for more details..

Marson Klik-Lok™ Plastic Rivet Setter / 48000

alt

This plastic rivet setter delivers the extra-long pulling stroke needed to set plastic rivets. Its all-steel construction and full-size handles make for smooth easy operation. The tool is packaged in a reusable, heavy-duty vinyl pouch.  Weight: .6 lbs. Click here for more details..

Klik-Turn™ Swivel Head Hand Riveter/ 39005 SP-1

alt

The SP-1 swivel head hand-held rivet tool features a patented positive-ratchet locking feature which will allow the swivel head section of the tool to turn 360° and hold in place in any of the forty plus positions. The high strength steel body and cast aluminum head complement this new design in a swivel head riveting tool. The Klik-Turn sets up to 3/16" steel rivets.
Weight: 1.2 lbs. Click here for more details..

Marson Kliker® Hand Riveter / 39040

alt

The Kliker is the perfect medium duty tool, setting all 1/8" to 5/32" steel, and 3/16" all aluminum Klik-Fast rivets. The kliker comes packaged in a heavy duty vinyl pouch with an assortment of Klik-Fast rivets and washers. Weight 1 lb. Click here for more details..

Marson® Air Hydraulic Tools

Marson M-3 Heavy-Duty Riveter / 39054

alt

This heavy-duty air/hydraulic riveter with its newly designed machined forged head can hold up under demanding continuous use. The steel forged head allows for continuous full operating power and less internal wear. The M-3 will set blind rivets from 1/8" diameter in all alloys, up to 3/16". Included with the M-3 are standard 1/8", 5/32", and 3/16" nosepieces, a service wrench, swivel inlet air coupler and a mandrel collection bottle. The recommended airline pressure is 85-95 PSI. Weight: 3.0 lbs. Click here for more details..

Marson M-3V Heavy-Duty Riveter / 39055

alt

This heavy-duty air/hydraulic riveter with its newly designed  internal vacuum system,  allows the mandrel to be held in position while operating the tool at any angle. The M-3 will set blind rivets from 3/32" diameter in all alloys, up to 3/16". Included with the M-3 are standard 3/32" 1/8", 5/32", and 3/16" nosepieces, a service wrench, swivel inlet air coupler and a mandrel collection bottle. The recommended airline pressure is 85-95 PSI. Weight: 4.6 lbs. Click here for more details..

Marson M-4 Heavy-Duty Riveter / 39058

alt

This heavy-duty air/hydraulic riveter with its newly designed steel forged head can hold up under demanding continuous use. The steel forged head allows for continuous full operating power and less internal wear. M-4 can set rivets from 3/32"through 1/4" diameters in all alloys, and it has the capability of setting structural rivets. In addition to the standard size blind rivets it can also set 3/16" and 1/4" Klik-Split, Klik-Lock and othe structural blind rivets. The M-4 is supplied with 3/32", 5/32", 3/16" and 1/4" standard nosepieces, service tools, swivel inlet air coupler and a mandrel collection bottle. The recommended airline pressure is 85-95 PSI. Weight: 6.2 lbs. Click here for more details..

302-E Heavy-Duty Riveter / 39062

alt

This durable riveter with its fully adjustable vacuum  system holds  the rivet in the nosepiece, allowing the operator to rivet at any angle with one hand free. The vacuum system also automatically collects the spent mandrel into a collection bottle. This creates a cleaner and safer work environment by preventing spent mandrels from falling to the floor or work surface. This tool can easily install 3/32"to /3/16" diameter rivets in all alloys, and 1/4" diameter open-end rivets in aluminum/steel combination. A swivel air inlet for increased mobility when working is also included along with a push button trigger and molded frame which provides the operator with maximum comfort using minimal effort.
The recommended airline pressure is 85-95 PSI. Weight: 4 lbs. Click here for more details..

304-E Heavy-Duty Riveter / 39064

alt

This is our most powerful air/hydraulic riveter, with its fully enclosed vacuum system that holds the rivet in the nosepiece, allowing the operator to rivet at any angle with one hand free. The vacuum system automatically collects the spent mandrel into a bottle, creating a cleaner, safer work environment by preventing spent mandrels from falling to the floor. A traction pulling power of 4200 lbs. allows this tool to easily set structural rivets such as Klik-Lock®  and other structural blind rivets. Its long 7/8" stroke enables the tool to set most rivets in one pull. In addition to the nosepieces for structural rivets, nosepieces to install 3/16" and 1/4" standard rivets are also included along with a push button trigger and molded frame which provides the operator with maximum comfort using minimal effort. The recommended airline pressure is 85-95 PSI. Weight: 5 1/2 lbs. Click here for more details..

IL-1 In-Line Riveter / 39070

alt

This durable in-line riveter with its fully adjustable vacuum system holds the rivet in the nosepiece in any riveting position and automatically ejects  the mandrel into an attached container. The IL-1 is capable of setting  rivet diameters from 3/32" through 3/16" in all alloys and easily hangs from any balancer. This is an ideal tool for assembly line riveting.
The recommended airline pressure is 85-95PSI. Weight: 3 lbs. Click here for more details..


Marson® Threaded Insert Tools

Marson Thread-Setter™ Tool / 39200

alt

This quality threaded insert tool features patented bearing design, comfortable hand grips and a locking chain. The 39200 installs all sizes of Klik Poly-Nuts and Klik Rivet-Nuts up to 1/4" and 6mm steel. The forged, heat treated steel upper handle, precision die-cast body of high strength aluminum alloy, patented fulcrum pin design and comfortable hand grips all combine to make the 39200 a rugged, durable tool. The tool is packed in a reusable, heavy-duty vinyl pouch containing mandrels and nosepieces to set 8-32, 10-24, and 10-32 inserts. Weight: 1 lb. 3 oz. Click here for more details..

140-SP Thread Setting Tool / 39223

alt

This spin-pull tool automatically threads the fastener onto the mandrel. Press the  trigger and the fastener is installed. Reverse the trigger position and the mandrel spins out of the fastener. The  140-SP features a totally adjustable stroke length to suit any grip range and a swivel air inlet for increased mobility. No complicated tear down is required to adjust the stroke or to change thread sizes...both adjustments are done outside the tool!  The 140-SP handles threaded insert sizes from 6-32 through 1/4"-20 and 4mm through 6mm in aluminum or steel. 6-32 through 1/4-20 mandrels and nosepieces are included. Weight: 4.9 lbs. Click here for more details..

150-SP Thread Setting Tool / 39221

alt

Our most powerful thread setting tool is the same tool as the 140-SP  handling threaded insert sizes from  4-40 through 1/2"-20 and 3.5mm through 10mm in aluminum or steel.
6-32 through 3/8-16 mandrels and nosepieces are included. Weight: 6 lbs. Click here for more details..

325-RN Thread Setting Tool / 34604

alt

Choose the 34604 for installing larger size rivet-nuts and thread-serts. Model 34604 Now with  extended range over it's predecessor is a heavy-duty tool that will install from 10-24/32 threads through  3/8-16 and  5mm - 10mm Threaded Inserts in aluminum or steel. The tool comes with 1/4-20 mandrel and nosepiece. Weight: 4 1/4 lbs. Click here for more details..


Marson® Rivet/Tool Kits

200 Hand Riveter Kit™ / 39001

alt

The Deluxe hand riveter kit includes the HP-2 and 200 assorted Klik-Fast rivets in popular sizes. The molded plastic case houses and protects the tool, rivets, and optional countersink double ended drill bit. Weight 4 lbs. Click here for more details..

Marson Klik-Lok™ Plastic Rivet kit / 48001

alt

You'll be all set for the next job that requires plastic rivet fastening with this kit. The kit includes the 48000 Plastic Rivet Setter, and a 20-pack of our most popular sizes:

No. 58106, 58108, 58149 and 58150.
 
A reclosable carton provides storage for rivets and tools. Click here for more details..

Marson Plastic Rivet Kit / 48006

alt

This kit includes the versatile KL-2 Plastic Rivet Setter, plus a 20-pack each of our four most popular rivet sizes: No. 58106, 58108, 58149 and 58150. A reclosable carton provides storage for rivets and tool. weight: 1.5 lbs. Click here for more details..

Marson Stainless Steel Hand Riveter Kit / 39003

alt

This kit is the same as our 39001 hand riveting kit, but contains 200 assorted Klik-Fast stainless steel rivets.  Weight 4 lbs. Click here for more details..

Marson® Threaded Insert / Tool Kits

Aluminum Thread-Sert® Kit 39213

alt

Model 39213 Aluminum Thread-sert Kit contains the 39200 thread-setter tool in a molded plastic case with 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18 and  3/8-16 mandrels and nosepieces, wrench and instructions. The kit contains 62 assorted Aluminum Klik-Thread-serts: 10 each 57910, 57920, 57930, 57940, 57950; 6 each 57971, 57981.
Weight: 3 lbs. Click here for more details..

Metric Poly Nut™ Kit 39203

alt

Model 39203 Metric Poly-Nut Kit contains the 39200 thread-setter tool in a molded plastic case with 4mm, 5mm, 6mm and 8mm mandrels and nosepieces, wrench and instructions. The kit contains 75 assorted Klik Poly-Nuts; 25 each 57407, 57409; 15 each 57411; 10 each 57413. Weight: 3 1/4 lbs. Click here for more details..

Poly Nut™ Kit 39202

alt

Model 39202 Poly-Nut Kit contains the 39200 thread-setter tool in a molded plastic case with 8-32, 10-32 and 1/4-20 mandrels and nosepieces, wrench and instructions. The kit contains 44 assorted Klik Poly-Nuts; 12 each 57425, 57435, 57445; 8 each 57455. Weight: 3 lbs. Click here for more details..

Steel Thread-Sert® Kit 39214

alt

Model 39214 Steel Thread-sert Kit contains the 39200 thread-setter tool in a molded plastic case with 6-32, 8-32, 10-24 10-32 and 1/4-20, 5/16-18 and  3/8-16 mandrels and nosepieces, wrench and instructions. The kit contains 62 assorted Steel Klik-Thread-serts: 10 each 57810, 57820, 57830, 57840, 57850; 6 each 57871, 57881. Weight: 3 1/4 lbs. Click here for more details..

Thread-Setter™ Kit 34501

alt

Model 34501 Thread-Setter Kit contains the 39200 thread-setter tool in a molded plastic case; mandrels and nosepieces for 6-32, 8-32, 10-24 sizes and a mandrel for 1/4-20. The kit also includes 103 assorted Klik Rivet-Nuts and Klik Poly-Nuts, instructions and a wrench, all contained in a compartmentalized carrying case. Weight: 2 3/4 lbs. Click here for more details..

Marson® Rivet Nuts

Marson Klik® Rivet-Nuts

alt

Klik Rivet-Nuts can be used in a wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, Klik Rivet-Nuts are perfect for use in metal, fiberglass and rigid plastic previously too thin for tapped threads. Klik Rivet-Nuts provide a neat appearance and once in place, the internal threads are ready for a screw or bolt. Click here for more details..

Marson Klik® Rivet-Nuts/Ribbed

alt

Klik Rivet-Nuts/Ribbed can be used in a wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, Klik Rivet-Nuts/Ribbed are perfect for use in metal, fiberglass and rigid plastic previously too thin for tapped threads. Klik Rivet-Nuts/Ribbed provide a neat appearance and once in place, the internal threads are ready for a screw or bolt. Click here for more details..

Marson Klik® Poly-Nuts

alt

Klik Poly-Nuts can be used in a wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, Klik Poly-Nuts are perfect for use in metal, fiberglass and rigid plastic previously too thin for tapped threads.Klik Poly-Nuts  rovide a nearly flush appearance and once in place, the internal threads are ready for a screw or bolt. Click here for more details..

Marson Klik® Thread-Serts/Poly-Nuts

alt

Klik Thread-Serts are a versatile threaded fastener that can be used in a variety of applications. Use Klik Thread-Serts in any thickness of metal or rigid material of at least 3⁄32" (.0937). Eliminate the need for tapping,welding and brazing. Klik Thread-Serts’design consists of an upper sleeve and a base which has both internal and external threads. Click here for more details..